Extrusion line record
Injector Nozzle DLLA147P962 (093400-9620) for Toyota Dyna 1KD-FTV
Common rail injector nozzle DLLA147P962 (DLLA 147P 962) with cross reference 093400-9620, fitting injectors 095000-7011, 23670-30120, 23670-30130 and 23670-30290 on Toyota Dyna and 1KD-FTV 3.0 D-4D engines. New aftermarket nozzle.
Machine specification
Output, material and line configuration in one view.
Die set, cooling, speed and packing notes remain visible for plant buyers.
| Part Number | DLLA147P962 (DLLA 147P 962) |
|---|---|
| Cross Reference | 093400-9620 |
| Product Type | Common Rail Injector Nozzle |
| Fits Injectors | 095000-7011, 23670-30120, 23670-30130, 23670-30290 |
| Application | Toyota Dyna / 1KD-FTV 3.0 D-4D |
| Condition | New aftermarket |
Product Detail
Injector Nozzle DLLA147P962 for Toyota Dyna 1KD-FTV
DLLA147P962 is a common rail injector nozzle supplied as a replacement for the injectors listed below. It is the atomising component at the injector tip and is normally renewed as part of an injector overhaul.
Where This Nozzle Is Used
- Fits injectors: 095000-7011, 23670-30120, 23670-30130, 23670-30290
- Cross reference: 093400-9620
- Application: Toyota Dyna with the 1KD-FTV 3.0 D-4D engine
Nozzle Specifications
| Item | Value |
|---|---|
| Part number | DLLA147P962 (DLLA 147P 962) |
| Cross reference | 093400-9620 |
| Product type | Common rail injector nozzle |
| Condition | New aftermarket |
Why Nozzles Are Replaced
The nozzle seat and needle wear against each other with every injection event, and abrasive particles or water in the fuel accelerate that wear. A worn nozzle widens the spray pattern, upsets the balance between cylinders and changes exhaust smoke. Because the nozzle is the last component in the fuel path, it also absorbs contamination that passes the filter.
Fitting Notes
- Check the number stamped on the original nozzle before ordering; nozzle families are not interchangeable.
- Renew the copper washer and O-rings at the same time and keep the injector body clean during assembly.
- Recode the injector where the engine management requires it.
Supply and Service
MOQ 1 piece. Neutral, original or customised packaging available. Technical support and training material can be supplied for workshops carrying out injector overhaul work.
Request a line quote
Send material, output and plant requirements.
We will prepare a line, tooling and commissioning route.