Extrusion line record
Volvo Delphi E3 Unit Injector 21569200 / BEBE4K01001 for D11 D13 Engines
Delphi E3 electronic unit injector 21569200 with OE / cross references BEBE4K01001, 7421569200, 85013271, 7485013271 and HRE367, for Volvo D11 / D13 / MD13 engines and FH12, FH13, FM13, FM16, FMX trucks, and Renault trucks.
Machine specification
Output, material and line configuration in one view.
Die set, cooling, speed and packing notes remain visible for plant buyers.
| Part Number | 21569200 |
|---|---|
| OE / Cross References | BEBE4K01001, 7421569200, 85013271, 7485013271, HRE367 |
| Type | Delphi E3 Electronic Unit Injector (4-pin) |
| Nozzle | L322PBC |
| Application | Volvo D11 / D13 / MD13 engines; FH12, FH13, FM13, FM16, FMX trucks; Renault trucks |
Product Detail
Volvo Delphi E3 Unit Injector 21569200 / BEBE4K01001
21569200 is a Delphi E3 electronic unit injector with OE / cross references BEBE4K01001, 7421569200, 85013271, 7485013271 and HRE367. It is used on Volvo D11, D13 and MD13 engines in FH12, FH13, FM13, FM16 and FMX trucks, and on Renault trucks. The nozzle is L322PBC and the injector is a 4-pin design.
Where This Injector Is Used
- Part number: 21569200
- OE / cross references: BEBE4K01001, 7421569200, 85013271, 7485013271, HRE367
- Application: Volvo D11 / D13 / MD13 engines; FH12, FH13, FM13, FM16, FMX trucks; Renault trucks
- Nozzle: L322PBC; 4-pin
Injector Specifications
| Item | Value |
|---|---|
| Part number | 21569200 |
| OE / cross references | BEBE4K01001, 7421569200, 85013271, 7485013271, HRE367 |
| Type | Delphi E3 electronic unit injector (4-pin) |
| Nozzle | L322PBC |
| Application | Volvo D11 / D13 / MD13 engines; FH12, FH13, FM13, FM16, FMX trucks; Renault trucks |
Why Unit Injectors Are Replaced
On the D11 and D13 the unit injector works at high pressure and a heavy duty cycle. The control valve and nozzle wear over time, so the injected quantity drifts from the value the ECU expects. Drivers notice hard starting, a rough idle, falling power and black smoke, and the ECU eventually stores a correction-limit fault.
Fitting Notes
- Confirm the number on the original unit before ordering; unit injectors are matched to the engine variant.
- Renew the copper washer and O-rings and keep the injector bore clean.
- Recode the injector where the engine management requires it.
Supply and Service
MOQ 1 piece. Neutral, original or customised packaging available.
Request a line quote
Send material, output and plant requirements.
We will prepare a line, tooling and commissioning route.