Home/Products/Bosch Unit Pump 0414755008 for DAF 95XF CF75 CF85 XF95 Euro3
Bosch Unit Pump 0414755008 for DAF 95XF CF75 CF85 XF95 Euro3 unit pump

Extrusion line record

Bosch Unit Pump 0414755008 for DAF 95XF CF75 CF85 XF95 Euro3

Bosch EUP unit pump 0414755008 with interchangeable numbers 0414755005, 0414755006 and 0414755018 and OE number DAF 1435558, for DAF 95XF, CF75, CF85 and XF95 Euro3 trucks and TEMSAA LPR228S1.

MOQ1
SKU0414755008
Request a Quote

Machine specification

Output, material and line configuration in one view.

Die set, cooling, speed and packing notes remain visible for plant buyers.

Part Number0414755008 (0 414 755 008)
Interchangeable0414755005 / 0414755006 / 0414755018
OE NumberDAF 1435558
TypeBosch EUP Unit Pump
ApplicationDAF 95XF, CF75, CF85, XF95 Euro3 trucks; TEMSAA LPR228S1

Product Detail

Bosch Unit Pump 0414755008 for DAF Euro3 Trucks

0414755008 is a Bosch EUP electronic unit pump for DAF 95XF, CF75, CF85 and XF95 Euro3 trucks. In an EUP system each cylinder has its own camshaft-driven pump feeding a short high-pressure line to the injector, so the pump is replaced as a complete unit.

Where This Pump Is Used

  • Interchangeable numbers: 0414755005, 0414755006, 0414755018
  • OE number: DAF 1435558
  • Application: DAF 95XF, CF75, CF85 and XF95 Euro3 trucks; TEMSAA LPR228S1

Pump Specifications

ItemValue
Part number0414755008 (0 414 755 008)
Interchangeable0414755005 / 0414755006 / 0414755018
OE numberDAF 1435558
TypeBosch EUP electronic unit pump
ApplicationDAF 95XF, CF75, CF85, XF95 Euro3 trucks

Why Unit Pumps Are Replaced

The pumping element and delivery valve wear against their seats with every camshaft revolution. As they wear, the injected quantity drifts and the ECU compensates until the correction limit is reached. Drivers notice hard starting, a rough idle, falling power and smoke, and the fault is often accompanied by a cylinder-balance code.

Fitting Notes

  • Confirm the number on the original unit before ordering; EUP pumps are matched to the engine variant.
  • Keep the high-pressure line and pump bore clean and use new sealing washers.
  • Recode the unit where the engine management requires it.

Supply and Service

MOQ 1 piece. Neutral, original or customised packaging available.

Request a line quote

Send material, output and plant requirements.

We will prepare a line, tooling and commissioning route.

QUOTE REQUEST

FORM · REV.1