Extrusion line record
Bosch Fuel Injector 0432191362 for MTU 2000 and Detroit Diesel Engines
Bosch fuel injector 0432191362 with cross references 0010108651, E0010108651 and 0432191363, for MTU 2000 Series and Detroit Diesel 40, 60, 71 and 92 Series engines.
Machine specification
Output, material and line configuration in one view.
Die set, cooling, speed and packing notes remain visible for plant buyers.
| Part Number | 0432191362 (0 432 191 362) |
|---|---|
| Cross Reference | 0010108651, E0010108651, 0432191363 |
| Application | MTU 2000 Series; Detroit Diesel 40 / 60 / 71 / 92 Series engines |
Product Detail
Bosch Fuel Injector 0432191362 for MTU 2000 and Detroit Diesel
0432191362 is a Bosch fuel injector for MTU 2000 Series and Detroit Diesel 40, 60, 71 and 92 Series engines. It is a complete injector assembly, replaced when the nozzle and internal control parts reach the end of their service life.
Where This Injector Is Used
- Cross reference: 0010108651, E0010108651, 0432191363
- Application: MTU 2000 Series and Detroit Diesel 40, 60, 71 and 92 Series engines
Injector Specifications
| Item | Value |
|---|---|
| Part number | 0432191362 (0 432 191 362) |
| Cross reference | 0010108651, E0010108651, 0432191363 |
| Application | MTU 2000 Series; Detroit Diesel 40 / 60 / 71 / 92 Series |
Why Injectors Are Replaced
Injector wear shows up as hard starting, a rough idle, falling power and black smoke. Wear inside the nozzle and control valve alters the injected quantity, and the engine management corrects for it until the limit is reached. On these engines the injector is normally replaced as a complete unit rather than repaired in the field.
Fitting Notes
- Confirm the number on the original injector before ordering; these injectors are matched to the engine variant.
- Renew the copper washer and O-rings and keep the injector bore clean.
- Recode the injector where the engine management requires it.
Supply and Service
MOQ 1 piece. Neutral, original or customised packaging available.
Request a line quote
Send material, output and plant requirements.
We will prepare a line, tooling and commissioning route.